Our Planet

Meet Minty the Northwest’s skateboarding tortoise thanks to WSU Tri-Cities

Dust off those glasses because that’s not Tony Hawk you’re seeing.

Thanks to four mechanical engineering students at Washington State University, a disabled tortoise in the Tri-Cities has a new mobility device to help her glide around.

Minty, a young gopher tortoise at Northwest Tortoise in Kennewick, Wash., has been finding it easier in recent weeks to crawl, slide and saunter about thanks to a new skateboard-like device strapped to her shell.

“With daily therapy and things we’ve been working on, in the spring she’ll be pretty darn mobile. She’s already made huge progress,” said Terese Meyer, Minty’s owner and founder of the nonprofit Northwest Tortoise.

Minty, a gopher tortoise, stretches and moves her legs while perched atop the mobility device recently designed and created by a group of WSU engineering students for the injured reptile. The tortoise is cared for by Terese Meyer of Northwest Tortoise, a nonprofit rescue organization based in Kennewick.
Minty, a gopher tortoise, stretches and moves her legs while perched atop the mobility device recently designed and created by a group of WSU engineering students for the injured reptile. The tortoise is cared for by Terese Meyer of Northwest Tortoise, a nonprofit rescue organization based in Kennewick. Bob Brawdy bbrawdy@tricityherald.com

Last week she seemed more interested in eating strawberries and fending off the pet cats than scooting about. Her sluggishness is attributed to seasonal brumation, which is like hibernation but for reptiles.

“Some days she makes it down the hall, others she doesn’t. Just depends on how strong she’s feeling,” Meyer said. “She only has about two, three minutes of stamina.”

Minty — likely about 29 to 43 years old — suffers from a disease called metabolic bone disease, caused by malnutrition.

Years of a poor diet caused her shell to collapse and fracture her spine, making it difficult to crawl around without any support underneath her. Gropher tortoises can usually live past 100, but Minty’s lifespan is likely to be a fraction of that because of her condition.

She was relinquished to Northwest Tortoise — the region’s only nonprofit rescue and sanctuary serving ill and abandoned tortoises — about three years ago.

To help her walk, Meyer has been taping a small block of Styrofoam beneath her to support her weight.

WSU engineering students Sprout Stokes, left, and Andrew Zapata document the underside of Minty the gopher tortoise for later reference while designing and building a mobility device for the tortoise. Terese Meyer of Northwest Tortoise is hoping to find a better method than double-sided tape and a piece of foam to help the 26-year-old tortoise get around.
WSU engineering students Sprout Stokes, left, and Andrew Zapata document the underside of Minty the gopher tortoise for later reference while designing and building a mobility device for the tortoise. Terese Meyer of Northwest Tortoise is hoping to find a better method than double-sided tape and a piece of foam to help the 26-year-old tortoise get around. Bob Brawdy bbrawdy@tricityherald.com

In October, WSU students from the Richland branch campus began the process of designing an attachable prosthetic as part of an undergraduate capstone project. Sprout Stokes, Abdullah Alsheri, Andrew Zapata and Emma Waldroup are the students involved.

The group came up with five 3D-printed, plastic prototypes for Minty to try out: two-wheeled devices, a sled, a platform elevated by stilts and a ball-point pen foundation.

The young tortoise ultimately found the wheel prototype with casters the most comfortable. It provides her a range of motion, as well as the ability to move backward.

“I think this method is very interesting and it works,” Meyer said. “I think (the students) accomplished a lot with this. They’re all hard working, and very receptive to feedback and different ideas.”

Terese Meyer attaches a mobility device recently designed and created by a group of WSU engineering students to Minty, a gopher tortoise, that is helping the injured reptile gain strength and get around on her own.
Terese Meyer attaches a mobility device recently designed and created by a group of WSU engineering students to Minty, a gopher tortoise, that is helping the injured reptile gain strength and get around on her own. Bob Brawdy bbrawdy@tricityherald.com

The final iteration of the preferred design cost students about $50 to design, print and construct, though it includes specifications from three prototypes and can be outfitted for different stages of Minty’s recovery or for other animals. Meyer said she’s looking forward to seeing how it holds up on the concrete and lawn.

Doug Reid, a project engineer at Washington River Production Solutions and the WSU adjunct professor who served as their advisory, said the finished product is “functional and cost-efficient.”

“We all look forward to seeing the positive impact that their hard work will have on Minty’s quality of life,” he said in a written statement.

Northwest Tortoise nonprofit

Northwest Tortoise is in an inconspicuous home in a Kennewick cul-de-sac. It’s the only organization of its kind in the Pacific Northwest and is not open to the public.

A revolving assortment of hundreds of tortoises occupy a backyard retrofitted by Meyer, a Tri-Cities native whose life has been dedicated to these interesting creatures.

With its dry, arid summers, the Tri-Cities makes for one of the best places in the U.S. for tortoise sanctuaries. They can live outside nine months out of the year.

With winter in full swing, the reptiles are currently hibernating in sheds outfitted with lamps and hay bedding.

All donations to the nonprofit help provide quality care to tortoises and help them rehome abandoned animals.

Meyer’s website provides information on:

WSU engineering students Sprout Stokes, left, and Andrew Zapata work together using digital calipers to get accurate shell measurements of Minty the gopher tortoise as fellow student Emma Waldroup records the them in a notebook for later reference while designing and building a mobility device for the tortoise.
WSU engineering students Sprout Stokes, left, and Andrew Zapata work together using digital calipers to get accurate shell measurements of Minty the gopher tortoise as fellow student Emma Waldroup records the them in a notebook for later reference while designing and building a mobility device for the tortoise. Bob Brawdy bbrawdy@tricityherald.com

This story was originally published December 25, 2022 at 8:00 AM with the headline "Meet Minty the Northwest’s skateboarding tortoise thanks to WSU Tri-Cities."

Related Stories from Centre Daily Times
Eric Rosane
Tri-City Herald
Eric Rosane is the Tri-City Herald’s Civic Accountability Reporter focused on Education and Local Government. Before coming to the Herald in February 2022, he worked at the Daily Chronicle in Lewis County covering schools, floods, fish, dams and the Legislature. He graduated from Central Washington University in 2018.  Support my work with a digital subscription
Get unlimited digital access
#ReadLocal

Try 1 month for $1

CLAIM OFFER